Manual Shot Blasting Machine

The only tool in the world that “sweeps” everything: capable of achieving a roughness depth of up to 120 µm and a surface preparation level of between Sa 2½ and Sa 3.

• Elimination of corrosion, coatings, scale and remains of adhesive products.
• Level of surface preparation comparable to Sa 2½ - Sa 3 according to DIN EN ISO 8501-1.
• Roughness depths up to 120 µ
• ATEX certification for zone 1 (Ex II 2G c IIA T4 X).
• Fast, flexible and profitable.
• Safe and environmentally friendly handling.
• Ideal for repair and upgrade work and for treating weld joints.

Bristle Blaster® allows deep corrosion and coating removal very quickly. At the same time, the Bristle Blaster® generates a surface preparation level comparable to Sa 2½ - Sa 3 and a roughness depth of up to 120 µm. Our technology offers numerous advantages over conventional surface treatment methods:

RESULTS

• Removal of corrosion, coatings, scale and adhesive residues.

• Surface preparation comparable to DIN EN ISO 8501-1, from Sa 2½ to Sa 3.

• Surface roughness depth up to 120 µm.

• Minimal erosion of the base material.

• High resistance to cracks, fatigue and stress cracking thanks to the compaction of the surface.

• No heat damage or fingerprints on the treated surface.

• Effective removal of viscous coatings without fouling or greasing the brushes.

COST EFFECTIVENESS

• Preparation times are short, as the equipment is lightweight and portable.

• There are no transport costs for abrasive material.

• There is no cost to dispose of the contaminated shot.

• No need to isolate the work environment.

• Treating a surface with Bristle Blaster® does not prevent or hinder normal work in the immediate vicinity.

• Power consumption is low.

 SECURITY

• Reduced vibration.

• ATEX certification for works in zone 1 according to Ex II 2G c IIA T4 X (Bristle Blaster® pneumatic).

• The sound pressure level is low and does not exceed 83.2 dB (A).

• Protective clothing is not required.

• Lightweight and ergonomic construction.

 RESPECT FOR THE ENVIRONMENT

• No material harmful to the environment is used.

• There are no transport costs for abrasive material.

• It is not necessary to dispose of contaminated shot.

• Dust development is minimal.

• Power consumption is very low.