☑ Comprar pistolas para chorro de arena Online | Jomar

Sandblast

✅ Buy and purchase the benchmark sandblasting equipment in the market from the most prominent brands such as Graco .

✔ We have a large warehouse and stock for fast shipments of 24/48 hours. We are official distributors and SAT Jomar with more than 45 years of experience.

✔ We guarantee the quality and efficiency of the products.

✔ If you cannot find the reference or the equipment you are looking for, do not hesitate to Consult with the company: Official SAT: Phone 954317383 or

Subcategories

Sandblasting machine

PORTABLE BLASTING MACHINES, in this section we offer you the best sandblasting machines for all types of abrasive blasting applications.

The blasting machine is the core of abrasive blasting using a pressure reservoir for the abrasive. The JOMAR product range offers different sizes and variants of tanks, so that the best possible sandblasting machine can be used for each application and for each environment, whether it is used mobile or fixed.

We offer very compact and extremely mobile blast equipment sandblasters with a ½ "pipe section, ideal for smaller jobs where easy transport of the sandblaster is required. For our larger tanks we use pipe sections of 1¼ ", which have been established as the standard for performance and mobility. Due to the larger section of the tube, the pressure loss due to friction in the pipes is less. In this range we offer tanks for jet equipment between 50 and 300 liters

All our sandblasters are suitable for all types of abrasives , thus covering a wide spectrum of applications. We can offer suitable solutions even for very fine abrasives that often do not flow well. In general, when it comes to abrasive blasting, it is often referred to as "sandblasting", although sand as an abrasive itself is no longer common for health reasons.

A question that is often asked about sandblasting is the question of the right compressor to be able to efficiently use the blast machine's sandblasting machine. A common mistake is to associate the correct compressor with the size of the tank, since the required compressor depends rather on the size of the respective nozzle and the corresponding air flow rate. Therefore, for sandblasting it does not matter whether you use a 100 or a 200 liter tank.

Before we ship our areandoras we check their operation, so that they can be used immediately after delivery without the need for further adjustments. All tanks are CE certified and therefore comply with the most current standards. When it comes to selecting materials, we highly value quality and long-lasting durability. In order to keep the tank running without major investment, we also guarantee the supply of spare parts, whether it is replacing worn ball valves or individual valve parts are required.

If you decide on one of our blast cleaning systems, you will receive a complete system that, in addition to the sandblasting machine, also contains the rest of the equipment, such as the hose, the nozzle and the safety equipment. Therefore, our blast cleaning systems are ideal as a start-up package, so you don't have to worry about purchasing the correct package.

TYPES OF ABRASIVE: Shot Steel ball Copper slag Garnet Olivino, silica sand, aluminum silicate, ...
APPLICATIONS: Shipyards. Metallic structures. Bridges. Tanks Boilerworks. Refineries Restoration. Facades

Low Pressure Sandblasting Machine

Jomar offers in this section a great variety of models ofAdjustable low pressure portable sandblasters.

SandblastersThey are often used in a wide variety of jobs. It should be noted thatsandblastersSmaller, they are used for small restoration or touch-up work. Whereas, sandblasters with larger tanks are used for restoration, industrial and construction work.blast rooms.What's more,in outdoor work for the treatment of large surfaces, blasting of structures, cleaning of facades, etc.

Jomar With more than 40 years of experience, it helps you choose theportable sandblasting machineAnd fromabrasive grain(corundum, microspheres, shot, carbon silicate or slag, iron silicate, iron shot, copper slag, etc.), which you should use, depending on each application.

Main characteristics of portable sandblasters:

Sandblasting equipmentFor blasting and blasting large structures both outdoors and inside the warehouse and workshop.
Low pressure sandblasting machines ideal for restoration work.
Versatile portable sandblasters of various sizes.
Robust valves with simple assembly system for all components.
Equipped with complete equipment, helmet, hoses, mouthpieces and respirator filter for the operator.
PORTABLE LOW PRESSURE BLADERS

MODEL	SANDY	PANDA 24	PANDA 80	PANDA 120
CAPACITY (liters)	Fifteen	25	80	120
NOZZLE (mm)	2 and 4	4	7	7
PRESSURE (bar)	0.5-8	0.5-8	0.5-8	0.5-8
FLOW RATE (lt / min)	1000	1300	4000	40,000
COMPRESSOR (cv)	10	Fifteen	40	40

Ecoquip Steam Sandblasting Machine

The ECOQUIP 2 are the new generation of Equipment or GRACO System, for abrasive blasting with steam . Maximum jet power with minimum dust. Graco powerful EcoQuip 2 Vapor Abrasive machines are easy to use, powerful, portable and transportable to take from job to job.

Several Ecoquip models are available with different capacities 55 l - 100 l - 200 l.

Why Buy an EcoQuip Blasting System?

For professional use only
Same performance as sandblasting
92% less dust: reduction of tarpaulins and containments
Savings of up to 75% blast abrasive
Less restrictive PPE requirements
Reduction of environmental impact
Much less water than with the wet stream - forget about cleaning large mud flats

Sandblaster with Recovery

Sandblasting equipment with recovery are machines designed to carry out localized sanding or surface cleaning operations without the loss of dust and / or abrasives. The blasting equipment recovers the material instantly by means of a special brush nozzle.

All recovery sandblasting equipment is equipped with a compressed air pressure regulator that controls blast power and a pneumatic remote control to start and stop the duty cycle. The remote control is operated with a manual lever valve equipped with a safety closing system and closing of the pneumatic circuit with double tube to avoid accidental opening.

Special for marble engravings, headstones, or any job without the need for dust.

Sandblasting Personal Protection

Operator protection - Total protection, total comfort

At Jomar we offer everything you need for the total safety of the operator. All our accessories are CE marked, protecting the shot blasting machine against excess heat, cold, dust and noise.

Protection coupled with operator comfort are the foundation of safety products and when the equipment is used with the appropriate accessories, the shot blasting machine can focus on their work safely and comfortably, thus achieving the highest levels of productivity.

personal protection

Abrasive blasting carries the risk of injury. Therefore, a fully reliable safety equipment is essential, one of the highest protection systems available to achieve comfortable conditions in the blasting environment and total safety for the operator.

Aftercooler

Aftercoolers are installed in compressed air systems with the aim of lowering the temperature of the compressed air and the percentage of humidity .

Buy aftercoolers and avoid problems ahead of time.

Official distributors and Technical Assistance Service with more than 45 years of experience.

We guarantee the quality of our products.

We have a large warehouse with stock for fast shipments of 24/48 hours.

Internal Pipe Blasting

"Highest standards for shot blasting and tube coating require optimum quality tools to get the job done"

Tubes connect our world. Its applications are multiple: as transport pipes in the energy sector, in the industrial sector or as construction elements. Modern coatings sustainably protect tubes against corrosion, but place severe demands on substrate preparation.

The internal pipe blasting equipment removes corrosion, dust and other debris from inaccessible areas inside the pipe quickly, effectively and reliably. The operation is simple: a tube tool is attached to a blast hose and the tool travels from end to end of the tube. Shot blast technology applies a 360 ° shot blast flow to the inner wall and produces a uniform shot blast finish ready for any coating.

Selecting the correct tool for the tube requires an exact dimensioning of the tube. Smaller internal diameter tube, up to 304mm, is best treated with a JMP BLAST tool, which uses a deflector cone to create the 360 ° blast pattern. For tubes with internal dimensions greater than 304 mm, JMP BLAST recommends the tool that uses a rotating blast head to achieve a high impact finish and uniformity. JMP BLAST tube tools can be used inside tubes up to 1,500 mm diameter.

The rotating blast head is activated either by a compressed air inlet or by a separate air motor. When larger diameter pipes or a large volume of pipes are to be shot blasting, jOMAR recommends the use of a pipe tool driven by an air motor, which creates the perfect balance between precision, maximum reliability, durability and large blast volume. .

Manual Shot Blasting Machine

The only tool in the world that “sweeps” everything: capable of achieving a roughness depth of up to 120 µm and a surface preparation level of between Sa 2½ and Sa 3.

Elimination of corrosion, coatings, scale and remains of adhesive products.
Level of surface preparation comparable to Sa 2½ - Sa 3 according to DIN EN ISO 8501-1.
Roughness depths up to 120 µ
ATEX certification for zone 1 (Ex II 2G c IIA T4 X).
Fast, flexible and profitable.
Safe and environmentally friendly handling.
Ideal for repair and upgrade work and for treating weld joints.

Bristle Blaster® allows deep corrosion and coating removal very quickly. At the same time, the Bristle Blaster® generates a surface preparation level comparable to Sa 2½ - Sa 3 and a roughness depth of up to 120 µm. Our technology offers numerous advantages over conventional surface treatment methods:

RESULTS

Removal of corrosion, coatings, scale and adhesive residues.

Surface preparation comparable to DIN EN ISO 8501-1, from Sa 2½ to Sa 3.

Surface roughness depth up to 120 µm.

Minimal erosion of the base material.

High resistance to cracks, fatigue and stress cracking thanks to the compaction of the surface.

No heat damage or fingerprints on the treated surface.

Effective removal of viscous coatings without fouling or greasing the brushes.

COST EFFECTIVENESS

Preparation times are short, as the equipment is lightweight and portable.
There are no transport costs for abrasive material.
There is no cost to dispose of the contaminated shot.
No need to isolate the work environment.
Treating a surface with Bristle Blaster® does not prevent or hinder normal work in the immediate vicinity.
Power consumption is low.

SECURITY

Reduced vibration.
ATEX certification for works in zone 1 according to Ex II 2G c IIA T4 X (Bristle Blaster® pneumatic).
The sound pressure level is low and does not exceed 83.2 dB (A).
Protective clothing is not required.
Lightweight and ergonomic construction.

RESPECT FOR THE ENVIRONMENT

No material harmful to the environment is used.
There are no transport costs for abrasive material.
It is not necessary to dispose of contaminated shot.
Dust development is minimal.
Power consumption is very low.

Manual Gun

Suction gun for sandblasting / shot blasting for Professional use. The quality of the product is guaranteed.

We have a large warehouse with stock for fast shipments of 24/48 hours.

We are official distributors and Technical Assistance Service with more than 45 years of experience.

Consult the company if you have any questions about the products or references.

Sleeves Cabin

In this section Jomar offers you the different types of Sleeves Cabins.

Blasting Equipment of all kinds with Suction, Direct Pressure and Wet Blasting Machines. Special Equipment and also Automatic Equipment:

Dry and wet glove blasting booths (blasting equipment).
Sandblasting equipment, blasting guns and manual sandblasting machines.
Manual blasting machines and automatic blasting machines.
Blasting booths with water and abrasive, wet blasting.
Special blasting machines with jet gun movement.
Direct pressure blasting equipment, cyclone blasting machines.
Shot blasting and sandblasting machines without dust, sandblasting machine with dust extraction.
Satellite blasting machines.
Blasting booth with recovery of the abrasive, blasting in a closed circuit.
Manual shot blasting machines with glass microspheres, corundum, shot, plastic abrasive and ceramic abrasive.

Jet or Shot Blasting Cabin

The blasting or blasting booths are designed to achieve continuous work in blasting operations, generating a continuous cycle from the projection of the abrasive, transport, classification and storage, until it reaches the sandblasting machine again.

Cabins with partial collection or adaptations of lift and filtration systems for jet rooms can be supplied.

The Blasting Room

The Blasting Room is built using panels of folded sheet or sandwich type, lined with anti-abrasive rubber.

The lighting of the enclosure is done by low-consumption bulbs, protected by tempered glass.

Ventilation

Ventilation is carried out by a SUCTION UNIT , driven by a high-performance fan.

It is equipped with high-efficiency filter cartridges and an automatic cleaning system for them using compressed air.

Transportation and Recovery

The transport and recovery of the projected abrasive is carried out by means of the longitudinal and transverse sweeping of the cabin floor, (SWEEPER TRAY) that unloads in the elevator.

In turn, the elevator delivers to the classifier, and once the cleaning and classification has been carried out, it unloads the valid shot into the silo for later reuse.

The Sweeper Tray system

The SWEEPER TRAY system is simple and reliable. It has a low profile, so it requires shallow pits.

It can also be installed on the slab, further reducing the aforementioned civil work.

The Electrical Control Panel

The ELECTRICAL CONTROL PANEL is mounted inside a metal cabinet.

It is equipped with a general switch, fuses, contactors, thermal protectors, terminal blocks, keypads, etc ... Complying with the current CEI standard .

ALSO, AT JOMAR WE OFFER YOU THE FOLLOWING INSTALLATIONS, ACCORDING TO SECTOR OR APPLICATION.

METAL

Shot Blasting Cabins

Equip. inst. Jet

Ventilation Systems

Pressurized Cabins

Aspirating floors

Open Cabins or Wall

Abrasives and Shots

- A complete range of Shots and Abrasives for Surface Impact Treatments . From the most common abrasives for cleaning and roughening treatments to specific ones for the most demanding technical treatments.

- Abrasives and Shots: Aluminum silicate, glass microsphere, shot, corundum, garnet ...

- wide range of abrasives for blasting, shot blasting, cleaning, sandblasting, microblasting, impact ...

- Sectors: Naval, restoration, industrial, wood, aeronautics,

Sorry for the inconvenience.

Search again what you are looking for

Menu

Home

⚙⚙ TECHNICAL SERVICE ⚙⚙

▷ WE PICK UP YOUR EQUIPMENT

▷ REPAIRS IN 24/48 HOURS

▷ WE DELIVER AT YOUR HOME

OFFERS

SAGOLA TURBINA 2200PRO 220V/50+MANGUERA+PISTOLA SAGOLA - 30640401

TURBINA HVLP PROFESIONAL SAGOLA 1000 W. TURBO 1000 - 430000318

SAGOLA PISTOLA GRAVEDAD 3300 GTO 1.40[3300 EPA] SAGOLA - 10141562

ULTRAMAX AIRLESS HH CORDLESS, 2B, 240V 17P258 . Solvent and Water

PISTOLA AIRLESS GRACO PC CON BOQUILLA LP517 - 17Y043

ARENADORA SANDY 18L BAJA PRESION REGULABLE 0,5 - 12 BARS

246101 GRACO FUSION GUN AP,AR4242 (01),ROUND

287032 GRACO EASY-OUT GUN FILTER, 60 MESH (BLACK)

copy of TURBINA 9.0 HVLP FINISHPRO STANDARD DE GRACO 17P529

Our Stores

Sandblast

Sorry for the inconvenience.

Information

USEFUL LINKS

Menu

Shopping Cart

Home

⚙⚙ TECHNICAL SERVICE ⚙⚙

▷ WE PICK UP YOUR EQUIPMENT

▷ REPAIRS IN 24/48 HOURS

▷ WE DELIVER AT YOUR HOME

OFFERS

Our Stores

Sandblast

Sorry for the inconvenience.